Products Description
5 Axis machined aluminum anodize part we provide such complex geometries and tight tolerances (±0.01mm) machining via CNC turning and combine with 5 Axis machining. Anodizing transforms the surface into a durable, corrosion-resistant aluminum oxide layer that will never peel or wear through. Require any 5 Axis machined aluminum anodize part, XC Precision was the one-stop solution for you. From Prototypes to volume production.
What's 5 Axis Machining?
5-Axis Machining represents the pinnacle of CNC manufacturing. Unlike conventional 3-axis or 4-axis machining, 5-axis technology enables simultaneous movement across X, Y, Z axes plus two rotational axes (A and B). This capability allows machinists to approach a part from any direction in a single setup
Advantages of 5 Axis Machining
1. One setup- Reduced Setup Time and Lower Labor Costs
Each setup introduces risk: misalignment, crashing, measurement errors. Fewer setups = fewer opportunities for mistakes
2. Superior Surface Finish
Shorter, more rigid tools due to tilt
Reduced vibration = Smoother finish
3. Machining Impossible Geometries
Like Undercuts, Deep Cavities, Multi-Angle Features
---------------- Machining lead time guide at XC Precision------------------------
|
Services |
Typical Lead Time |
|
Prototype (1-5 pcs) |
5-7 business days |
|
Low-volume (10-100 pcs) |
10-15 business days |
|
Production (100-1000+ pcs) |
15-25 business days |
Note: Anodizing or other surface treatment required, then typically adds 2-5 business days to machining lead time (outsourced to qualified finishing partners).
Surface Finish in XC Precision
|
Image |
Finishes |
Application and Features |
|
|
Sand Smooth |
For both Metal and Plastic Parts Sand Smooth can be applied to the part to reduce its surface roughness, machining marks are less evident but still visible. |
|
|
Spray Painting |
For both Metal and Plastic Parts Painting is a well-known way to add colors. It is a great way to improve the aesthetics of the parts, especially for plastic parts |
|
|
Powder Coating |
Mainly for metal parts. Powder Coating is a dry finishing process that result in a smooth finish and creates a hard finish that is tougher than conventional paint. Colors can be according to your RAL/Pantone code |
|
|
Mirror Polish |
Mainly for metal parts. Mirror polish reach a very shinny surface. Like mirror |
|
|
Brush |
Only for metal parts. Brushing is produced by polishing the metal grit resulting in a unidrectional satin finish |
|
|
Anodise |
Mainly for Aluminum Parts. Anodising is used to increase surface hardness, wear resistance and the lifespan of the Aluminum parts. The colors can be clear ,Red. Blue, Silver, Gold, etc |
|
|
Black Oxide |
Mainly for steel Parts Black Oxide is a coating used to improve corrosion resistance and minimize light relection. |
|
|
Plating |
For Plastics and metal. Electroplating is used for maintenance or purely decorative purposes. We can coat your parts in chrome, zinc, nickel etc |
Hot Tags: 5 axis machined aluminum anodize part, China 5 axis machined aluminum anodize part manufacturers, suppliers, factory
