Products Description
Polyurethane Vacuum Casting is also silicone mold process. Our polyurethane vacuum casting can produce the parts from similar ABS/PC/PA/PP and Rubber parts to you. With silicone mold you can get 5-50 parts in 10 days and no hard tooling. Just from silicone mold. It is perfect for pilot run and low volume production. We are able to make the products, like Shell, structural components, gears, sliding parts, sealing rings, auto parts…All custom made according to your design drawings
--------------------Our Vacuum Casting Process Capabilities----------------------
Raw Materials: PU Resin
Biggest Size: 800mm×600mm×500mm
Tolerance Control: ±0.15mm/100mm
Min Wall Thickness: 0.5mm
Suitable Production Volume: 10-100pcs
Available Vacuum Casting Materials for Reference in XC Precision
|
PU Resin |
Features and Applications |
|
|
PU8150 |
Similar ABS |
The most common and cost effective, Impact-resistant, dimensionally stable, easy to sand and paint. |
|
PX5210 |
Similar PC |
Transparent / Translucent, Excellent impact resistance. |
|
PX-225 |
Similar POM |
exceptional wear resistance, it is suitable for use in wear-resistant sliding and |
|
PU2180 |
Similar PA |
Wear-resistant, self-lubricating, and high-strength; can be reinforced with glass fiber. |
|
PU 8500 |
Similar PP |
High toughness, fatigue-resistant, and capable of repeated bending (hinged / snap-fit). |
|
PU8400 |
Rubber |
Soft Touch! Flexible on Shore A Hardness from 30 to 95 |
Vacuum Casting vs Rapid Prototype Molding
Both vacuum casting and Rapid prototype molding are used for low volume production.
Here show you the difference for these two technologies
|
|
Vacuum Casting |
Rapid Prototype Molding |
|
QTY |
5-100 PCS |
100-10000 PCS |
|
Raw Materials |
PU Resin (Similar to the real plastic) |
Real injection molding granules (Same as the production materials) |
|
Mold Life Span |
Silicone Mold 10-20 times |
Soft Steel Mold (5K to 50K) |
|
Lead Time |
1-2 weeks |
2-3 weeks |
So if you need the production less than 100 pcs, then it is better to choose vacuum casting. But if you need test the real plastic materials, then it must choose rapid prototype molding. Furthermore, if you need the prototypes testing for the rubber parts, vacuum casting can be the best suitable way.
Need 5–50 parts that feel like injection molding - without the mold cost?
Send us your CAD or a reference photo. We'll recommend material + quote in 24h
Hot Tags: polyurethane vacuum casting, China polyurethane vacuum casting manufacturers, suppliers, factory
